The next-generation BERES will revolutionize conventional concepts in terms of both design and functionality. "NX DRIVE TECHNOLOGY" realizes high straightness and flight distance performance.
Honma Beres NX Iron Set 5-Piece (7-11) NS Pro 850GH neo Steel Shaft
- Please be informed that manufacturer's warranty is non-eligible for overseas customers.
Features of this product
- The number and contents of the product are indicated in the product name, so please check it.
- For back-ordered products, we usually ship within 3-6 business days. The delivery date will be answered by e-mail after confirmation, as it may vary depending on the stock status of the supplier.
Technology
Tungsten weight & vibration absorbing resin bar The center of gravity is controlled by incorporating a tungsten weight and a vibration-absorbing resin bar into the cavity. In addition, the weight closer to the toe improves straightness and realizes high tolerance for impact blur. In addition, the synergistic effect with the wide sole creates a low and deep center of gravity, and even with a strong loft, it has a high trajectory and a high flight distance performance.
Vibration absorbing 3D emblem By attaching the 3D back face emblem to the face, it absorbs vibration at the time of impact. Achieves a hit feeling and sound like soft iron forging.
L-CUP face (#5-#9) We succeeded in reducing the thickness of the face as much as possible by increasing the rigidity of the head with a vibration-absorbing resin bar and 3D emblem and by absorbing the shock at impact. This achieves high repulsion performance over a wide range of the face, with a firm spin and a feeling of rebound. Demonstrates high flight distance performance even on miss hits.
Low center of gravity structure Surplus weight due to hollowing out the vibration absorbing bar insertion part and ultra-thin face is placed on the sole along with the tungsten weight. This thoroughly pursues a low center of gravity. It ensures a high launch even with a strong loft and achieves the ideal trajectory required for irons.
P-SAT precision spine management Set the spine at 6 o'clock for all clubs. It stabilizes the behavior of the shaft and enhances the completeness of not only the club alone but also the entire set.
Shaft, grip, head cover
▲NS Pro 850GH neo steel shaft
▲GR HONMA RUBBER 41 GD
spec
count/loft angle (°) | 7I/27 | 8I/31 | 9I/35 | 10I/40 | 11I/45 | |
---|---|---|---|---|---|---|
Head material/manufacturing method | 17-4 + body (casting) + [#5-8] AM355P face (casting), [#9-SW] CH170 face (rolling) + [#5-8] stainless steel screw + tungsten + resin | |||||
head finish | 2-layer plating half mirror + mirror finish | |||||
Lie angle (°) | 62.0 | 62.5 | 63.0 | 63.0 | 63.0 | |
Offset (mm) | 3.0 | 3.0 | 3.0 | 3.0 | 2.5 | |
length (inch) | 37.0 | 36.5 | 36.0 | 35.5 | 35.25 | |
Balance/gross weight (g) | R. | D1/about 408 | D1/about 415 | D1/about 422 | D1/about 429 | D1/about 432 |
S. | D1/about 411 | D1/about 418 | D1/about 425 | D1/about 432 | D1/about 435 | |
Grip name | GR HONMA RUBBER 41 GD | |||||
grip material | rubber | |||||
Grip weight (g) | 41.0 | |||||
grip size | 60 |
shaft | NS Pro 850GH neo steel shaft | ||
---|---|---|---|
flex | R. | S. | |
weight (g) | 84.5 | 88.0 | |
Tip diameter (mm) | 9.02 | ||
Butt diameter (mm) | 15.0 | ||
condition | middle tone |
Release date: November 25, 2022